Friday, November 20, 2020

DIY Thanksgiving Glasses

 These Thanksgiving Glasses will look great on any table during the holiday!

Happy Thanksgiving Day glasses


DIY Thanksgiving Glasses

yield:  2 GLASSES
 prep time:  10 MINUTES
 active time:  10 MINUTES
 total time:  20 MINUTES

Materials:
  • Cut File – I used a pre-made file from Cricut Access. 
  • Cricut 
  • Permanent Vinyl 
  • Transfer Tape 
  • Smooth Cups or Glasses 

Instructions:

Open the cut file and size it to fit your glasses. These glasses are right around 4 inches. So, my images were just over 2 inches tall. Weeding was a challenge for the smaller text, but, I love the end result!
Send the image to cut. Cut as many as you will need. I only put one image on each glass. But, if you wanted to put a turkey on the opposite side, that would be cute too!
While the vinyl is being cut, was the outside of the glass really well, and wipe it down with rubbing alcohol.
Weed the excess vinyl. Then use scissors to separate the images. Next, apply the transfer tape on each image. Use a scraper or even a credit card to smooth the transfer tape on the image.
Apply the image to the glass. The glasses I used were pure cylinders, so it was easier to apply the vinyl to them without wrinkling it. Use a scraper or credit card to smooth the vinyl on the glass. Then, remove the transfer tape.




No comments:

Post a Comment